LED Indicator Light Status

Description

How to

Blinking blue

Power on 

Press the SYNC button for 2 seconds

Add doorbell to HomeBase/Wi-Fi

Doorbell Chime

Press and hold the SYNC button until you hear a beep

Solid blue for 3 seconds

Setup successfully

Connected successfully with HomeBase/Wi-Fi

Doorbell Chime

Off

Setup successfully and working normally (No PIR trigger）

/

Solid orange

Charging

Charge via MicroUSB cable

Solid blue (when LED is enabled)

• Connected and speaking
• Remote viewing in Eufy app

Watching live view 

Breathing blue

• Detected human (Human Only Detection mode)
• Detected human or object (All Motion Detection Mode)
• Someone is pressing the doorbell ring

Press the doorbell and trigger the doorbell camera

Off

Upgrading firmware

/

LED Indicator Light Status

Description

Blinking red

Ready for setup

Solid red

Failed to connect to the network

Blinking blue

Connected to the network successfully but has not been setup

Solid blue

Setup successfully

Blinking red and blue alternately

Upgrading firmware

LED Indicator Light Status

Description

Solid red

Power on

Solid green