The cleaning tray is part of the X9 Pro that helps to clean the mopping cloth when it is docked. Over time, the cleaning tray can become residual with dirt and debris. You will need a soft-bristled brush or a damp cloth to clean the cleaning tray. It is recommended to clean the cleaning tray after every use to prevent dirt and debris from accumulating. To remove the cleaning tray from the X9 Pro, you must turn off the robot vacuum and unplug it from the power source. Then, pull the clips on both sides to remove them.

1. Remove any large debris or dirt from the cleaning tray. Then, use a soft-bristled brush to gently scrub the inside of the cleaning tray.
2. Rinse the cleaning tray with water and wipe it with a damp cloth to remove any remaining dirt or debris.
3. When the cleaning tray is clean and dry, place it back into the Auto-Clean Station, then press the clips on both sides to secure them.

It is important to note that the cleaning tray should not be put in the dishwasher. It should only be cleaned with a soft-bristled brush or a damp cloth. By following these simple steps, you can easily clean the cleaning tray of your X9 Pro robot vacuum and ensure that it is working at its best.

If you need further assistance, please contact us.