What should I do if the stem is shaking during use?

What should I do if the stem is shaking during use?

If you are experiencing shaking or wobbling of the stem during use, there are a few simple steps you can take to address the issue:

1. Lower the stem: Start by lowering the stem to its lowest position. This will make it easier to access the screws that hold the stem in place.

2. Loosen the stem screws: Using a screwdriver, loosen the screws at the back of the stem. Be careful not to remove them completely.

3. Straighten the stem: Once the screws are loosened, straighten the stem to ensure that it is aligned properly.

4. Tighten the screws: With the stem straightened, tighten the screws at the back of the stem. Be sure to tighten them securely, but not so tight that they strip the threads.

5. Lower the stem again: Once the screws are tightened, lower the stem again to its lowest position. If the stem is still loose, tighten the screws a bit more until the shaking stops.

By following these simple steps, you can quickly and easily address any shaking or wobbling of the stem during use. If you continue to experience issues, don't hesitate to contact our customer support team for further assistance. We are always here to help!